High Efficiency 15 SEER with Advanced Inverter Technology.

Friedrich New Line Of energy Efficient Mini Split Air Conditioners features the Advanced Inverter Technology which lets you reach the desired temperature FASTER, maintain it MORE ACCURATELY, and REDUCE energy costs.

Inverter Technology eliminates the constant compressor start-ups/ shut-downs required to maintain the set temperature with traditional technology. It controls compressor rotation speed precisely and adjusts capacity to meet demand, which in turn reduces energy consumption.

Inverter Technology allows each system to adjust capacity and cooling output to provide only the amount of cooling needed at a given time.–For example an 18,000 BTU/h system will operate even more efficiently as a 15,500 if that is all that's needed.

This unit comes with a low ambient controller which allow the heating and cooling modes to operate even when temperatures go down to 0º F

This unit must be installed by a qualified licensed HVAC technician. Manufacturer covers parts only under warranty. Installer is responsible for labor warranty.

• Cooling and Heat pump operation
• Two independently controlled indoor units connect to one outdor unit
• Use in adjoining rooms, long narrow rooms, or as backup systems
• Inverter technology allows systems to operate more efficiently and effectively by adjusting capacity and cooling output to precisely meet demand
• Variable Capacity Advantages mean a new level of system flexibility and control
• Fully featured for total convenience:
• Monitors and maintains set point
• Programmable
• 24-hour timer
• Sleep timer
• Energy Saver
• Continuous air sweep
• Wireless remote control
• Four fan speeds plus auto fan
• Auto/cool/dry fan modes
• Auto restart
• Washable air filters
• Auto shut flaps
• Easy installation - Your system will be up and running in just a few short hours in most cases
• Low installed cost - Ductless systems have a clear advantage over central air conditioning when ducts are not already present
• Lower utility bills - Unlike central air conditioners that cool all the areas the same, ductless systems cool only those rooms you tell it to. No more wasted dollars on cooling unused rooms.
• Ultraquiet operation - Ductless systems are in sharp contrast to other types of air conditioners where the rush of air from ducted vents can be annoying, or where compressor noise of window units can be objectionable
• Security advantage - Only a small 3 inch hole is needed for connecting indoor and outdoor units. No worries about intrusion through window installations or wall openings.
• Low ambient cooling - All models feature built-in controls that allow the unit to cool even when outdoor temperatures fall to 0°F. An important feature typically required for computer, telecom and electronic gear rooms, or any other room requiring year-round cooling

• System:
  Indoor Units: 1 - MW09Y3FM & 2 - MW12Y3FM
  Outdoor Unit: MR36TQY3F
  Complete System Model #: M33TYF
• Total Heating and Cooling Capacity :  2 x 12,000 BTU and 1 x 9,000 BTU
• SEER:  15.0
• HSPF:  9.0
• Moisture Removal (Pts/H) :  2.9
• Air Flow (Quiet, Low, Med, High) CFM :  185/220/260/295
• Factory Pre charge Refrigerant :  sufficient amount for up to 165 Ft. Of Line
• Max Line Length:  each unit:82 Total:230.
• Max Height Difference :  49 Ft.
• Indoor Unit Dimensions (W x H x D) :  31 1/8 x 10 7/8 x 8 ½
• Indoor unit net weight:  21 lbs. each
• Outdoor Unit Dimensions (W x H x D) :  35 3/8 x 32 5/8 x 13
• Outdoor Unit Net Weight:  159 Lbs.
• Sound Rating Indoor dB-A (Quiet, Low, Med, High) :  27/29/313/37
•  Sound Rating Outdoor dB-A :  52
• Operating Range Fº :  0-115
• Power Source:  230/208-60-1
• Min. Ampacity (AMPS):  22.5
• Cooling Watts:  2710
• Max. TD Fuse/Breaker (AMPS):  30
• Refrigerant Type:  R410A
• Compressor Type:  Inverter
• Connections:  Flare
• Liquid Line O.D:  1/4"
• Suction Line:  3/8"